38G.14.DN25

Kit with heat exchanger and direct distribution group - reversible - DN 25 - with connections for by-pass (616) and safety group

The kit 38G.14.DN25 is composed of a heat exchanger, complete with fill/drain cock and safety group, and a direct distribution group on the secondary side. The kit 02C.10 is composed of the only heat exchanger, complete with fill/drain cock and safety group, and the fittings necessary for the primary and secondary side connection. The kits with heat exchanger can be used in several system types, as for example biomass, solar, heating. They can be installed to separate circuits with different fluids (i.e. with/without glycol), to avoid dirt from entering the circuit of a new generator, to couple an open vessel primary circuit to a closed vessel secondary circuit or to avoid the sum of the power outputs of two generators supplying the same system (according to the Italian standard). The kit with heat exchanger 02C.10 is complete with fittings for distribution group connection. The safety relief valve and the expansion vessel connection should be considered as the basic safety requirement for the system connected on the secondary side of the heat exchanger.

Working temperature range: 5–90 °C

Max working pressure: 10 bar

Female connections: EN 10226-1

Male connections: ISO 228-1

Connection centre distance: 125 mm

Pump:    Grundfos UPM3 AUTO L 25-70 180

             Wilo Yonos Para 25-6 180 RKA

             Grundfos UPSO 25-65 180 (Extra EU)

Suitable fluids: water, glycol solutions (max 30%)

Temperature gauge scale: 0–120 °C

Pressure gauge scale: 0–10 bar

Safety relief valve: ordinary

Working temperature range: 0–160 °C

Setting: 3 bar

Opening overpressure: 10%

Reseating pressure: -20%

Outflow coefficient: K=0,05

Suitable fluids: water, glycol solutions (max 50%)

2014/68/EU PED: Category IV

Brazed heat exchanger plates: stainless steel

38G.14.DN25 insulation: EPP

02C.10 insulation: closed cell expanded PEX

CODICE_ARTICOLOsizeCalibration [bar] pumpNPC
x----
38G02514UIG 1 M - G 1 F3UPM3 AUTO 25-70 1801
38G02514HIG 1 M - G 1 F3Para 25-180/7-50/SC-121
38G02514CIG 1 M - G 1 F3(Extra EU) UPSO 25-65 1801
38G02514XIG 1 M - G 1 F3SENZA POMPA1
38G02514ULG 1 M - G 1 F3UPM3 AUTO 25-70 1801
38G02514HLG 1 M - G 1 F3Para 25-180/7-50/SC-121
38G02514CLG 1 M - G 1 F3(Extra EU) UPSO 25-65 1801
38G02514XLG 1 M - G 1 F3SENZA POMPA1
38G02514UMG 1 M - G 1 F3UPM3 AUTO 25-70 1801
38G02514HMG 1 M - G 1 F3Para 25-180/7-50/SC-121
38G02514CMG 1 M - G 1 F3(Extra EU) UPSO 25-65 1801
38G02514XMG 1 M - G 1 F3SENZA POMPA1
Prodotti correlati