Barberi® check valves are monodirectional devices, allowing the backflow prevention of fluid under pressure. According to the model, they are normally used in domestic water installations, booster pump systems, heating systems, central heating systems, heat generators (wall-mounted boilers, solid fuel generators, heat pumps), thermal solar systems, generic industrial and agricultural water systems. Sealing is permitted through forces exerted by a spring and by the fluid pressure against a gasket which guarantees the seal even at very low back pressures. Moreover, the force of the spring allows the valve to have a universal characteristics concerning the installation position. The peculiarity of this Y-shaped universal check valve is the presence of an inspection plug to verify and clean the gasket.
Acceptable working temperature range (peaks): -20 (see suitable fluids)175 °C
Working temperature range: 0 (no frost)150 °C
Check valve opening pressure: 0,02 bar
Max working pressure:
from G 3/8 to G 1 35 bar
from G 1 1/4 to G 2: 25 bar
Suitable fluids: water for thermal systems, glycol solutions (max 50%)
Threaded connections: ISO 228-1
On request: versions with galvanic treatment
| CODICE_ARTICOLO | size | P [bar] | NPS | NPC |
|---|---|---|---|---|
| x | - | - | - | - |
| 130015000 | G 1/2 F | 35 | 20 | 160 |
| 130020000 | G 3/4 F | 35 | 14 | 84 |
| 130025000 | G 1 F | 35 | 10 | 60 |
| 130032000 | G 1 1/4 F | 25 | 5 | 30 |
Data sheet 
