Barberi® motorizable mixing valves allow the mixing between two fluids (e.g. hot and cold water) to get the desired temperature. They are used in heating and cooling systems, central heating systems, heat generators (wall-mounted boilers, solid fuel generators, heat pumps). The mixing is obtained through a shaped rotor that regulates the passage of the fluids. This rotor can be a sector or a butterfly, according to the valve type. The rotary mixing valves can be adjusted manually or by means of an electric actuator. If a regulation in diverting mode is needed, the 3-way mixing valves can be applied as diverting valves (art. 460, 461, 475, V60). Note: both the 3 and 4-way valves can be used to increase the return temperature to the generator as anti-condensation devices (in solid fuel or diesel generators).
Working temperature range (peaks): -20 (see suitable fluids)130 °C
Working temperature range: 0 (no frost)110 °C
Max working pressure: 10 bar
Obturator rotation torque: <5 N·m
Rotation angle: 90°
Leakage: <0,1%
Suitable fluids: water for thermal systems, glycol solutions (max 50%)
Threaded connections: female EN 10226-1 (V60, V50: ISO 228-1) male ISO 228-1
CODICE_ARTICOLO | size | Kv | NPS | NPC |
---|---|---|---|---|
x | - | - | - | - |
46001500MN | Rp 1/2 | 1,6 | 1 | 10 |
46001500MA | Rp 1/2 | 2,5 | 1 | 10 |
46002000MB | Rp 3/4 | 4 | 1 | 10 |
46002000MC | Rp 3/4 | 6 | 1 | 10 |
46002500MD | Rp 1 | 8 | 1 | 10 |
46002500ME | Rp 1 | 12 | 1 | 10 |
46003200MF | Rp 1 1/4 | 15 | 1 | 10 |
46003200MG | Rp 1 1/4 | 18 | 1 | 10 |
46004000ML | Rp 1 1/2 | 26 | 1 | 8 |
46005000MM | Rp 2 | 40 | 1 | 8 |